SERVICES AVAILABLE

Radon Testing

RADON TESTING

EPA Recommends:

  • Test your home for radon—it’s easy and inexpensive.
  • Fix your home if your radon level is 4 picocuries per liter (pCi/L) or higher.
  • One in every Five homes test positive for dangerous level of radon in Utah.
  • Radon is estimated to cause thousands of lung cancer deaths in the U.S. each year.
  • Radon levels less than 4 pCi/L still pose a risk, and in many cases may be reduced.   

Radon is a cancer-causing, radioactive gas. You can’t see radon. And you can’t smell it or taste it. But it may be a problem in your home. Radon is estimated to cause many thousands of deaths each year. That’s because when you breathe air containing radon, you can get lung cancer. In fact, the Surgeon General has warned that radon is the second leading cause of lung cancer in the United States today. Only smoking causes more lung cancer deaths.

Radon can be found all over the U.S. Radon comes from the natural (radioactive) breakdown of uranium in soil, rock and water and gets into the air you breathe. Radon can be found all over the U.S. It can get into any type of building—homes, offices, and schools—and result in a high indoor radon level. But you and your family are most likely to get your greatest exposure at home, where you spend most of your time.

You should test for radon. Testing is the only way to know if you and your family are at risk from radon. EPA and the Surgeon General recommend testing all homes below the third floor for radon.


You can fix a radon problem. Radon reduction systems work and they are not too costly. Some radon reduction systems can reduce radon levels in your home by up to 99%. Even very high levels can be reduced to acceptable levels.     

Methamphetamine Testing

Methamphetamine Testing

We offer 2 types of Methamphetamine Tests.

 
Screening test provides same day results with either positive or negative results.
Laboratory testing which takes approximately 5 business days and will provide exact levels for the home.

Mold Swabs /Surface Samples

Mold Swabs /Surface Samples

Why You Should Test for Mold

The main reasons for having mold testing performed in your home are:
  • You notice signs of mold such as a mold smell or mold symptoms
  • To identify the species of mold in your home
  • To help you find where mold is growing
Surface testing takes samples from household surfaces to find the amount of mold growth and spores deposited around the home. Samples are collected by swabbing.  The sample is then examined in a laboratory.

Thermal Imaging

Thermal Imaging

Identify Potential Problem Areas

  • Quickly diagnose home condition
  • Locate electrical and plumbing problems
  • Reveal HVAC duct work leaks
  • Identify displaced or missing insulation
  • Uncover moisture locations to prevent mold

Thermal Imaging Scan can identify Hot Spots in Electrical Panel. (Included in your home inspection!)

Air Mold Testing

Air Mold Testing

What is an air mold test for?

  • An air mold test is done with an air pump that gathers samples throughout the home. Mold spores are not visible to the naked eye, and the types of mold present can often be determined through laboratory analysis of the air samples.  Having samples analyzed can also help provide evidence of the scope and severity of a mold problem, as well as aid in assessing human exposure to mold spores.

Acquire peace of mind with a knowledgeable and certified home inspector that has advanced technology to detect problems that can be costly and stressful to correct.